DS SIMULIA Suite 2021 HF3 (Abaqus/Fe-safe/Tosca) Update Only (x64) | 2.73 GB
World-class software complex in the field of finite-elemental strength calculations, with which you can get accurate and reliable solutions for the most complex linear and nonlinear engineering problems.
DS SIMULIA TOSCA (FLUID / STRUCTURE)
TOSCA FLUID -Pack of geometric optimization using third-party solvers (FLUENT, STAR-CCM +)
Tosca Fluid Is So Far The Only Available System for Topology Optimization of Channel Flow Problems. Starting from An Initial Design Space, An Optimized Design of a Flow Channel Is Determined Automatically by Tosca Fluid. WITH ONLY OPTIMIZED STRUCTURE WITH E.G. Significantly Reduced Pressure Drop Or Homogeneous Flow Is Derived. This An Economic Topology Optimization of Industrial Large Scale Flow Applicatons.
Tosca Structure - a geometric optimization package using third-party solvers (ANSYS, ABAQUS, Permas, MSC.Nastran, NX.Nastran, MD.Nastran)
Tosca Structure IS The Market Leading Technology for Structural Optimization Based On Industry Standard Fea Packages (Abaqus, Ansys, MSC Nastran). IT ALLOWS FOR RAPID AND RELIABLE DESIGN OF LIGHTWEIGHT, RIGID AND DURABLE COMPONENTS AND SYSTEMS. Using Topology Optimization with Tosca Structure.topology You Obtain Optimal Design Proposals Alady During Design Concept. Specific Detail Improvements Through Shape and Bead Optimization ReSpectively (With Tosca Structure.Bead and Tosca Structure.Bead Respectively) Make Your Designs Ready for Production. With Tosca Structure.sizing You Find Optimized Sheet ThickNesses Even for Large Scale Applications with Up to Millions of Design Variables. The Result Are Designs with Optimum Relation Between Weight, Stiffness and Dynamic Behavior.
DS SIMULIA FE-SAFE
Package for modeling structural fatigue
Fe-Safe Is The Technical Leader in Fatigue Analysis Software for Finite Element Models. Fe-Safe Has Been Developed Continuously Since The Early 1990's in Collaboration with Industry to Ensure That It Continues to Set The Benchmark for Fatigue Analysis Software.
Fe-Safe Was The First Commercial Available Fatigue Analysis Software to Focus on Modern Multiaxial Strain Based Fatigue Methods. Fe-Safe Provides Unique Capabilities for Thermo-Mechanical Fatigue and Creep-Fatigue, The Fatigue Analysis Of Composite and Rubber Materials and The Verity Structural Stress Method for Welded Joints.
Fe-Safe Is Renowned for Its Accuracy, Speed, Comprehensive Capabilities and Ease of Use.
Regardless of the Complexity of Your Fatigue Analysis,
Fe-Safe Fits Smoothly Into Your Design Process, Enabling You to Develop Products That Are Designed for Durability.
Fe-Safe Offers The User An Easy-to-Use Fatigue Analysis Suite That Provides Reliable, Accurate Fatigue Life Predicttions Regardless Of The Complexity of Your Analysis
DS SIMULIA ISIGHT.
Simulia provides users with leading solutions that allow you to get maximum returns when using various software packages. Isight and Simulia Execution Engine (previously called Fiper) allow combining numerous interdisciplinary models and applications in the stream of simulation processes, automate their execution in distributed computing resources, explore the obtained design space and identify optimal design parameters in accordance with the requirements and restrictions.
Opportunities of our tested solutions to automate and optimize simulation simulation:
Radical reduction of design time due to the integration of workflows in an automated environment
Release more reliable, high-quality products due to the reduction of the timing of the design options
Reducing the volume of investments in hardware due to the efficient use of existing systems and work distribution
Effective communication due to strong co-operating partners in the design
ISIGHT key functions
Building model
File Sets File Sets (File Set) are a new and improved method for determining the dynamic arrays of incoming and outgoing files.
They allow you to configure file arrays by determining the location of the file and the file matching scheme.
The size of the file array is determined during the run of the program and each time it can change.
The content of the file set can be sorted by name (in alphabetical order) or by the date of change.
Replacing the keyword Jobid The new keyword {JobID} matches the current JobID task identifier in Isight.
Replacing the keyword {jobid} is made in the file parameters and in the components.
Replacing the keyword User new keyword {User} is the name of the user who has launched the task offline in Isight.
In previous versions, the keyword {user} was only available in SEE.
Component Enhancements.
Component Catia V5 Additional support in Isight Parameterization of the number of layers of layered composite material. Allowed values are: integers greater than 0. The order of the elements of the array corresponds to the order of the layers installed in CATIA.
Additional support in isight parameterization of composite material layers and main directions.
The permissible values of the orientation angle of the layer fibers in Isight correspond to the values set in the CATIA model.
Parameters are now fully saved when moving from Isight in Catia and back.
AnSys Workbench Development Environment Component AnSys Workbench development medium component has been improved and now supports the geometric conjugacy function. When importing a geometric data file (for example, Catia V5) in the ANSYS Workbench model (* .wbpj) and creating design parameters with reference to geometric parameters, you can update these parameters using a component via the geometric conjugacy interface.
To support this feature ANSYS Workbench, the parameters of the new file are created automatically using the component.
Runtime Gateway Visuals.
The correlation table in the new visual correlation table displays a thermal map of correlation values between selected incoming and outgoing parameters. In addition, the table helps users quickly determine high correlated pairs of incoming and outgoing parameters. Finally, it displays the same data as on the correlation map, but they are presented in another form.
The minimum / maximum values in the chronological data table in the chronological data table were added gray strings of minimal / maximum values, on which parameter values are displayed as part of a number of values of this column. Data in lines is updated in real time as the Simflow program is executed and adding new data to the table.
Improving graphs based on data arrays In previous ISIGHT releases, it was impossible to create graphs based on data from two different arrays.
Now Isight supports graphs to create data from two different arrays. For example, based on the ratio "Shift / Time" and "Strength / Time", the user can easily create a graph reflecting the "power / shift" ratio.
This makes much simplifies the process of subsequent discharge of the arrays of the chronological data of the ABAQUS component.
Forms to create licenses for the use of licenses New utility that allows you to create reports on the use of licenses of ISIGHT licenses.
Allows you to read data from event logging log on the Dassault Systemes license server or from Flexnet debugging log and personalize the report depending on the user's preferences.
Data output to a standard output device or in ASCII files of various formats (Table, CSV, JSON).
Year / Release Date: 2020
Version: 2021 HF3
Developer: Dassault Systemes
Blossomy: 64bit
Interface language: English
System Requirements: Windows 7 / 8.1 / 10 64-bit
What News?
Official site does not provide any info about changes in this version.