The and Galaxy Tab S7+ are going to be Samsung’s flagship tablet offerings for 2020. The Tab S7 duo is expected to be unveiled alongside the Galaxy Note 20 series on August 5 at , and we have already learned plenty about them, and . Now, reliable sources have revealed to us a mostly complete spec sheet of the Galaxy Tab S7+.
Galaxy Tab S7+ specs include Snapdragon 865+, Sub-6GHz 5G support
We had revealed a few months ago , and we now know that at least the Tab S7+’s AMOLED display will have a screen resolution of 2800 by 1752 pixels. That equates to a pixel density of around 267 ppi, so the larger display on the Tab S7+ will not be as sharp as the screen on last year’s Galaxy Tab S6 despite the higher screen resolution.
The display will obviously support the S Pen. It will have Bluetooth built-in so it can be used as a remote control, which was also the case with the S Pen on the Galaxy Tab S6. We can’t confirm if the stylus will have gesture functionality like the Galaxy Note 10’s S Pen, or if it will support features like the improved pointer functionality .
Pushing all those pixels will be the Snapdragon 865+ processor. The faster variant of the Snapdragon 865, , is the first mobile chipset to break the 3GHz clock speed barrier and brings 10% faster GPU performance over the 865. It will be paired with either 6GB or 8GB of RAM, with 128GB and 256GB storage respectively. A microSD slot is no doubt going to be included, though the information we have received does not mention one.
We have also learned that the 5G variant of the Tab S7+ 5G will only support Sub-6 GHz frequency bands. That means Verizon customers in the US will not be able to use the carrier’s 5G network, at least initially, unless Samsung builds a custom variant for them . The lack of support for mmWave bands shouldn’t be an issue on other carriers and in other countries, however.
10,090 mAh battery, dual rear cameras
Both the LTE and 5G variants have a 10,090 mAh battery under the hood, and as confirmed recently, . That may or may not be a disadvantage depending on who you ask, but we think Samsung should have brought over the faster charging tech considering the kind of prices you have to pay for these flagship tablets. Even the iPad Pro, which is going to be the Tab S7/S7+’s direct competitor, supports charging speeds of up to 35W and has done so since 2018.
Like the Galaxy Tab S6, the Galaxy Tab S7+ will have a dual rear camera setup made up of 13MP and 5MP sensors and an 8MP front camera. It will run Android 10 and out of the box. The One UI 2.5 feature list is largely unknown, except that it will bring support for using Google’s navigation gestures in third-party launchers.
Finally, there’s an in-display fingerprint sensor on the tablet. We don’t know if it will be an optical sensor or an ultrasonic sensor like the one on the Galaxy S10, Note 10, and S20, but if we were to take an educated guess, we would say Samsung is going to stick with the former. That’s not a bad thing, as the optical fingerprint reader the company is using in 2020 is massively improved over the one it used last year.
The post appeared first on .
Galaxy Tab S7+ specs include Snapdragon 865+, Sub-6GHz 5G support
We had revealed a few months ago , and we now know that at least the Tab S7+’s AMOLED display will have a screen resolution of 2800 by 1752 pixels. That equates to a pixel density of around 267 ppi, so the larger display on the Tab S7+ will not be as sharp as the screen on last year’s Galaxy Tab S6 despite the higher screen resolution.
The display will obviously support the S Pen. It will have Bluetooth built-in so it can be used as a remote control, which was also the case with the S Pen on the Galaxy Tab S6. We can’t confirm if the stylus will have gesture functionality like the Galaxy Note 10’s S Pen, or if it will support features like the improved pointer functionality .
Pushing all those pixels will be the Snapdragon 865+ processor. The faster variant of the Snapdragon 865, , is the first mobile chipset to break the 3GHz clock speed barrier and brings 10% faster GPU performance over the 865. It will be paired with either 6GB or 8GB of RAM, with 128GB and 256GB storage respectively. A microSD slot is no doubt going to be included, though the information we have received does not mention one.
We have also learned that the 5G variant of the Tab S7+ 5G will only support Sub-6 GHz frequency bands. That means Verizon customers in the US will not be able to use the carrier’s 5G network, at least initially, unless Samsung builds a custom variant for them . The lack of support for mmWave bands shouldn’t be an issue on other carriers and in other countries, however.
10,090 mAh battery, dual rear cameras
Both the LTE and 5G variants have a 10,090 mAh battery under the hood, and as confirmed recently, . That may or may not be a disadvantage depending on who you ask, but we think Samsung should have brought over the faster charging tech considering the kind of prices you have to pay for these flagship tablets. Even the iPad Pro, which is going to be the Tab S7/S7+’s direct competitor, supports charging speeds of up to 35W and has done so since 2018.
Like the Galaxy Tab S6, the Galaxy Tab S7+ will have a dual rear camera setup made up of 13MP and 5MP sensors and an 8MP front camera. It will run Android 10 and out of the box. The One UI 2.5 feature list is largely unknown, except that it will bring support for using Google’s navigation gestures in third-party launchers.
Finally, there’s an in-display fingerprint sensor on the tablet. We don’t know if it will be an optical sensor or an ultrasonic sensor like the one on the Galaxy S10, Note 10, and S20, but if we were to take an educated guess, we would say Samsung is going to stick with the former. That’s not a bad thing, as the optical fingerprint reader the company is using in 2020 is massively improved over the one it used last year.
The post appeared first on .