- Nov 30, 2015
It's hacky as all hell and your battery life will be terrible. But it works.
While testing the Apple Watch Series 3 GPS + Cellular last night, I floated a crazy idea past iMore editor-at-large Rene Ritchie: What happens if you set up the Apple Watch on an iPhone, then swap that iPhone's SIM card over into an Android phone? Would the watch recognize that its paired iPhone SIM was no longer in an iPhone and stop working? Would it still work over a carrier's LTE connection? And more importantly: If it worked, what could it do?
Well, because we embrace insanity here at iMore, we tried it. And, barring a bit of hacky behavior, it works.
I'm going to preface this write-up by saying that I personally think this is a terrible way to use the Apple Watch. Your battery life will most certainly be nonexistent, because the watch solely relies on a LTE connection. You won't be able to get any fitness data on your Android smartphone. And you likely won't be able to access certain features like calling internationally or sending and receive SMS messages from your watch.
How we did it
I used my iPhone 8 Plus on AT&T and the new LTE Apple Watch Series 3, along with a loaner Galaxy S8 Active from Michael Fisher (of Mr Mobile fame), who also shot a video which we'll be posting soon.
After setting the Apple Watch up, we swapped my iPhone 8 Plus's SIM card into the Galaxy S8 Active, and isolated the iPhone 8 Plus in Airplane mode so that there was no possible way for the Apple Watch to connect to the iPhone or remembered Wi-Fi networks.
It took the Android device a few minutes to reboot and connect to AT&T. During that time, my watch showed a depressed "Disconnected," though it did attempt to connect to the (limited) cellular network inside our hotel in NYC.
Once the S8 Active was connected, I went outside (to find a stronger cellular signal) with only my watch. To kickstart it, I swapped the watch into Airplane mode, then back out of it. Then I asked Siri to call my mother. It took Siri a few seconds longer than it has over past Series 3 queries, but Apple's assistant delivered — and a few minutes later, I was talking to my very-confused mother.
We didn't stop there, however. Fisher and I then went up to our hotel's rooftop terrace and placed another call (to him), asked Siri a few queries, and checked for directions on the watch. We also sent an iMessage (!) to Rene, which delivered successfully even through cellular; it appears the watch has its own iMessage handshake protocol separate from iPhone when it's on cellular — even if your original phone SIM is now in an Android device.
I also had Fisher place an inbound call to me from his older iPhone 7. The call displayed on both the Apple Watch and the Galaxy S8 Active; I then picked it up on the watch and we proceeded to talk for a short period of time.
Things we still haven't tested, but I would like to explore:
- SMS ("green bubble") messaging: I couldn't get a straight SMS message to work when using my Series 3 over cellular normally, so I'm curious to see if this will work at all. We also didn't test receiving SMS messages on the watch.
- International calling: As with SMS, I couldn't get this to work when using the Series 3 in stand-alone mode, though this may be an AT&T limitation (along with no roaming).
- FaceTime Audio: If iMessage has its own protocol on the watch, it stands to reason that FaceTime Audio might as well — you'd just need to set up the original iPhone with iCloud, iMessage, and FaceTime addresses before switching to Android.
If I had to recommend this work-around to anyone, it would be families who have both an iPhone and an Android device — those who prefer Android in their pocket but want an Apple Watch on their wrist, and they have a family member with an accessible iPhone where they can still sync fitness data, iCloud calendars, and change settings.
Yes, you could use some random friend's iPhone to set up your watch, but it's a terrible idea from a security standpoint. Honestly, it's just a terrible idea, period. Don't do this.
Even if you do have a multi-device household, it's far from an ideal solution: Your watch's battery life is going to be awful from it needing to constantly try and look for LTE, and you'll be missing out on a lot of key features available to watch and iPhone users. Also worth considering: This "option" might disappear at any time with a software update or a carrier settings change.
What you need
If you are absolutely sure you want to do this, here's what you need to get started.
- An unlocked iPhone 6 or later
- A factory-default Apple Watch Series 3 GPS + Cellular watch
- An unlocked Android smartphone with a microSIM card slot
- A cellular network that supports Apple Watch Series 3 GPS + Cellular models
- A SIM removal tool
- Remove the SIM card from both your iPhone and your Android phone.
- Insert your Android phone's SIM card into the iPhone.
- Once your data connection enables, open the Watch app on the iPhone.
- Set up your watch, and add it to your carrier's cellular network.
- Finish setting up the Apple Watch.
- Switch the SIM card from the iPhone to your Android phone.
Toggle Airplane mode on and off on the Apple Watch to make sure it connects to its cellular network.
- Use your Apple Watch alongside your Android smartphone.
If you want to change your settings or sync your Apple Watch, you'll have to repeat steps 1-3 then adjust accordingly from the Watch app.
What do you think?
Would you try this insanity to get a little slice of Apple on your wrist even without an iPhone in your pocket? Let us know in the comments.
iPhone 8 at iMore: Everything you need to know!