Zuken E³.series 2017 version 18.36 Update

mitsumi

Active Member
1902112031550121.jpg


Zuken E³.series 2017 version 18.36 Update | 291.1 mb
Zuken has released an update to E³.series 2017, which marks another milestone in the continuous evolution of Zuken's powerful electrical, wire harness, and fluid engineering design tool.

Bug fixes 2017-18.36:

Designer-11031 Possible to place a dynamic symbol within a block
Designer-30949 Connector pin terminal symbol is not displayed when placing a new device view with the setting ''Use active connector pin terminal''
Designer-31053 Incorrect display of drill hole in cutout
Designer-31061 (Pilcrow) in output window with Russian operating system
Designer-31269 Impossible to directly connect a feed-through connector with single pin display from within the Database window -'Invalid position -Cannot place ALL the symbols; command aborted.'
Designer-31431 The COM method "sym.PLacePins" doesn ́t work when an assembly is defined as connector pin terminal
Designer-31533 Symbol graphic is changed after connecting MIL connectors by using variants
Designer-31591 Using Multiple Selection of graphic elements enables display of arrowheads on full circles
Designer-31682 Sheet access permission (for Delete Sheet) only works when the sheet has been opened before
Designer-31732 When resetting the Database tree, folders and contents remain expanded
Designer-31895 Double display of graphics by COM script exporting PDF from Formboard sheet
Designer-31902 Write protection via read-only level does not work for graphic groups
Designer-32043 When starting the DBE from E3.series, the maximum permitted 2sheet number affects the number of opened objects and leads to following message at graphic copy "Maximum of x sheets exceeded!"
Designer-32046 Error 'E -Error in function hncpst\get_valid_composites(), ret = 1' when copying a block symbol whereas the block owns a 'component without structure' without taking the structure and the block connectors don't have a component description assigned
Designer-32071 Nodes can't be deleted in Formboard
Designer-32086 Selected connect lines on panel sheet are displayed differently
Designer-32125 Not all model instances are updated in project
Designer-32138 E3 may crash under certain circumstances, when the COM method "sht.ImportDXF" is called with empty file nameDesigner-32158The option "Copy from selected sheet" does not work for text types "Name 1" (#40) and "Name 2" (#48)
Designer-32204 Wrong representation with PDF export (and all other exports) at ballooning
Designer-32210 SVG file in combination with HCV export of E3.3DRoutingBridge is incomplete
Designer-32236 Change on pin attribute interrupts with following message "Locked device(s) xxxxxx has been changed. Your changes will be reverted."
Designer-32241 Opening / editing a component in Database Editor may cause an infinite loop under certain circumstances
Designer-32244 E3.ReportScripts: Add-ons -E3.series documents -Create BOM: Price is not listed, when article number of component differs from the component name
Designer-32246 No ability to insert negative Z-coordinates in DBE in the node coordinates from a model pin -message -'I -The value must be between 0.00 and 1000000000000.00'
Designer-32256 E3 wrongly jumps to Pin Table when the pin is displayed in the column "Connection Target"
Designer-32269 The attribute '.Wiretype_Default' is not evaluated at signals of a signal class
Designer-32286 When a connector doesn't have a general connector symbol, it cannot be assigned to a block in DBE
Designer-32287 COM: The COM method "Pin.GetCableDuctIds" returns cable ducts twiceDesigner-32300Pin attributes in a formboard table subrow are not displayed
Designer-32319 Incorrect sorting of selection list for 'Connection type'
Designer-32337 GraphInterface::SetImageInfo can't embed TIF images
Designer-32345 Multi-user project cannot be opened due to text conflict after this text has been deleted in another Client (e.g. Update in Project, Change Component, Change Symbol)
Designer-32351 Incorrect length calculation for conductors/wires in cable duct references due to double elements having variants assigned
Designer-32383 When inserting multiple wire names and defining angle brackets () as format string, the wire names are no longer incremented

About Zuken E³.series 2017. Zuken's E3.series is a Windows-based, scalable, easy-to-learn system for the design of wiring and control systems, hydraulics and pneumatics. Its object-oriented architecture provides an integrated and consistent design approach to help eliminate errors, improve quality and reduce design time.

The 2017 release contains new and enhanced functionality that further increases productivity throughout all phases of engineering, from design to manufacture. New third party integrations extend the E3.series ecosystem of solutions.

Enhancements in E3.series 2017 cover all main E3.series modules: E3.schematic, E3.cable, E3.panel, E3.formboard and E3.PLC Bridge.

About Zuken. Zuken works globally with leading companies to optimize their electrical and electronic engineering design and related manufacturing processes through the provision of leading edge software and consulting services. Our unique combination of proven experience, technological expertise and agility creates best in class solutions. Our transparent working practices and belief in integrity in all aspects of business produces long lasting and successful customer partnerships.

Product: Zuken E³.series
Version: 2017 version 18.36 Update
Supported Architectures: 32bit / 64bit
Website Home Page :
Code:
Please, Log in or Register to view codes content!
Language: multilanguage
System Requirements: PC
Supported Operating Systems: Windows 7even or newer
Software Prerequisites: Zuken E3.series 2017 version 18.0 and above
Size: 291.1 mb

Download link:
Code:
Please, Log in or Register to view codes content!

Links are Interchangeable - No Password - Single Extraction
 

Users who are viewing this thread

Top