If you want to make your new Samsung flagship stand out, maybe take a look at this Galaxy S9 clear back mod which is going to put the phone’s internals on full display. What you’ll essentially be doing is feeling off the paint from the back cover thus exposing the inner components. Bear in mind, though, that this is going to void your warranty.
Galaxy S9 clear back mod
This Galaxy S9 clear back mod has been demonstrated by YouTuber JerryRigEverything who . His video will walk you through the steps that you need to take in order to make this happen.
The process involves heating up the device to loosen the adhesive that keeps the back glass in place followed by lots of poking and prodding to get the adhesive out of place so that the back glass can be lifted. Some of you will already have figured out by now that this process will damage the device’s waterproofing for good.
The next step involves removing black plastics that cover up the phone’s internals. Some non-essential bits and pieces are cut up and discarded. While the wireless charging pad could be removed on the to expose more of the internals, it can’t be removed on the since there’s a battery temperature sensor attached to it. If the pad is removed, the device won’t be able to charge even when plugged in and that would render it useless.
The penultimate step in this Galaxy S9 clear back mod then involves stripping the paint from the back glass and removing the laminate layer. However, with the laminate layer out of the way, the glass wouldn’t be held in place if the phone was dropped. It would fly everywhere. All that’s left to do next to finish this Galaxy S9 clear back mod is to use some double-sided tape to attach the back panel.
It’s easier said than done particularly if you have no experience tinkering with smartphone hardware. Not to mention the fact that you’ll be voiding the warranty and damaging its waterproofing. Nevertheless, it’s interesting to watch it all happen, so do check out his video below.
The post appeared first on .
Galaxy S9 clear back mod
This Galaxy S9 clear back mod has been demonstrated by YouTuber JerryRigEverything who . His video will walk you through the steps that you need to take in order to make this happen.
The process involves heating up the device to loosen the adhesive that keeps the back glass in place followed by lots of poking and prodding to get the adhesive out of place so that the back glass can be lifted. Some of you will already have figured out by now that this process will damage the device’s waterproofing for good.
The next step involves removing black plastics that cover up the phone’s internals. Some non-essential bits and pieces are cut up and discarded. While the wireless charging pad could be removed on the to expose more of the internals, it can’t be removed on the since there’s a battery temperature sensor attached to it. If the pad is removed, the device won’t be able to charge even when plugged in and that would render it useless.
The penultimate step in this Galaxy S9 clear back mod then involves stripping the paint from the back glass and removing the laminate layer. However, with the laminate layer out of the way, the glass wouldn’t be held in place if the phone was dropped. It would fly everywhere. All that’s left to do next to finish this Galaxy S9 clear back mod is to use some double-sided tape to attach the back panel.
It’s easier said than done particularly if you have no experience tinkering with smartphone hardware. Not to mention the fact that you’ll be voiding the warranty and damaging its waterproofing. Nevertheless, it’s interesting to watch it all happen, so do check out his video below.
The post appeared first on .