Autodesk HSMWorks 2018.2 (R3) Build R3.42596 | 595.2 mb
Autodesk Inc., a world leader in 3D design software for entertainment, natural resources, manufacturing, engineering, construction, and civil infrastructure, has released HSMWorks 2018.2 (R3) Build R3.42596, is an integrated 2.5- to 5-axis CAD/CAM programming solution for SOLIDWORKS.
Build R3.42596 / 2 October 2017
This release contains a number of important fixes and improvements, as identified below.
Added new strategy Probe to support common probing cycles for automatically updating the work offset.
Added support for approach mode for 2D Contour when machining a tapered wall. The default is to machine along the tapered wall. This setting allows the user to machine vertically instead so only the final pass will touch the wall. #6078
Added default description in Compare and Edit for the filter control to help explain its purpose. #8336
Changed filtering by capability such that the Milling filter no longer includes Mill-Turn posts in the post processing dialog. #8334
Changed presentation of the post configurations during post processing to primarily use the description from the post configuration itself. This ensures a better ordering of the posts. #8314
Added support for integer property definitions when using values with titles in the post processing dialog.
Add Renishaw Sample Probes library. #8302
Added advanced setting for Adaptive Clearing to control the cutting turn radius. You need to enable Advanced settings when editing the operation to see the new setting called "Curve In Radius". Alternatively you can use Compare and Edit to adjust its value. #7420
Added support for custom file filters for file path properties in the post processing dialog.
Added support for importing property definitions from the posts for nice presentation, validation and documentation.
Added progress indication when scanning posts during post processing.
Improved presentation of user defined properties in the post processing dialog and added additional error checking. #8100
Added "Keep Original" option to Duplication and Component pattern. #8094
Added support for singularity settings from machine configuration. These settings allow the post processor to adjust the toolpath at singularities for simultaneous multi-axis toolpath. #8083
Added support for SolidWorks 2018. #8066
Added Fixture Attachment point for Job. This is coordinate system can be used for integration with third party NC program simulation software. #7938
Added new API HSMWorks_getToolpathStats() to get toolpath statistics. #8033
Disabled deprecated Manage My Posts option from post processing dialog. #8337
Changed limit for angular settings to 10800 deg instead of 7200 deg.
Search field now has focus by default when opening the Compare and Edit dialog. #7908
Use the program name and comment for first job when multiple jobs are selected when post processing. #7515
Adjust layout of Tool Renumber dialog to make room for non-English translations. #7020
Fixed issue with Number of Stepovers parameter appearing twice for Swarf. #8228
Updated stock simulation to fix potential crashes and hangs.
Fixed issue with setting heights in Compare and Edit. #7883
Fixed performance issue where analyzing the model for holes could take significant time on parts with thousands of faces when making a drill operation. #8135
Fixed the default Fixed Size stock bounding box for the job. #7891
Fixed generation issue for Axis Substitution in 3D strategies. #8039
Fixed crash when enabling Tool Orientation issue when editing an operation. #7977
Fixed layout issue for 2D Chamfer which caused tolerance setting to be hidden. #7971
Removed unsupported lead radii for Turning Face. #7056
Removed unsupported stock to leave for Turning Chamfer. #1465
Avoid reapplication of feeds and speeds if the same tool is selected. #7557
Changes to toolpath generation:
Added support for merging multiple contours when they are touching for turning. #6156
Changed movement to using predrilling feed for Adaptive Clearing when using the predrill feature. #7743
Fixed issue where Adaptive Clearing would get stuck during calculation. #7327
Fixed potential failure for Turning Grooving. #7844
Fixed potential failure for Adaptive Clearing. #6587
Fixed issue with leads not remaining in fixed orientation when cutting at an angle for Turning Profile. #7782
Fixed retract exceeding clearance for Turning Profile. #7837
Fixed potential failure during staydown for Adaptive Clearing. #7825
Fixed potential failure for Adaptive Clearing. #7294
Changed turning to return error when multiple disjoint contours are provided. #6156
Improved support for predrilling for 2D Contour to support cases where tool size is very close to the pocket being machining. #7675
Improved retract linking for Turning Profile. #7498
Improved toolpath quality near rotary axis for Turning Profile. #7545
Changes to post processor:
Added API PostProcessor.registerTerminationHandler() to register functions to be called at end of processing.
Added API for multi-axis singularity settings. See MachineConfiguration.setSingularity() for details.
Fixed support for Unicode for ZipFile API. #7021
Fixed issue where toolpath information was not available during onTerminate().
Changes to post library:
Added Siemens 840D with subprograms post.
Added ACU-RITE MILLPWR G2 post.
Added support for product and holder links for HTML Tool Sheet.
Added Kern laser post.
Added new property 'useTCPC' to switch between TCP and no-TCP for HAAS Next Generation posts.
Added support for accumulated depth for the G73 canned cycle for HAAS mill posts.
Detect and present product ID for tool and holder as link for HTML setup sheet.
Improved CAMplete post for better support of installed CAMplete.
Added DMS router FAGOR 8055 & 8065 posts.
Added property 'writeComments' to enable/disable comments for Maho 432 post.
Added CNC Router Parts Mach3 plasma post.
Added post for Maho Philips 432.
Added Mach3 waterjet and plasma posts.
Updated support for G112/XZC machining for HAAS mill-turn posts.
Added ProtoTRAK turning post.
Added G48 support for CSS mode for Mach3 turning post.
Added support for switching to mm/s using property 'useUnitPerSecondFeedrates' for WinPC-NC. The default is mm/min. This feature is only supported for metric mode.
Added support for turning off rigid tapping using property 'useRigidTapping' for Fadal post. Rigid tapping is enabled by default.
Added support for laser cutting for UCCNC post.
Added property 'abrasiveFlow' for Hydren waterjet post.
Updated properties for specifying the machine model for Roland RML post.
Updated properties for specifying the fourth axis for UCCNC posts.
Updated properties for specifying the fourth axis for WinPC-NC posts.
Added properties to tell which rotaries are available to avoid G28 retracts when not desired for HAAS Next Generation posts.
Updated when to use the chip breaking and deep drilling canned cycles for Anilam ISO post.
Don't show number of flutes if 0 for HTML Setup Sheet.
Updated MultiCam HPGL post to only accept 3-axis toolpath.
Ignore work offset for Roland post.
Updated MultiCam ISO post to only accept 3-axis toolpath.
Updated FlexiCAM post to only accept 3-axis toolpath.
Updated documentation for properties for posts.
Added failure when not using machine rotaries for multi-axis simultaneous toolpath for posts.
Updated documentation for properties for posts.
Adjusted encoder reset at rewinds for HAAS UMC-750 post.
Adjusted rewind handling for HAAS with trunnion post.
Updated support for floating tab holder for Andronic post.
Changed description for HTML Setup Sheet.
Updated retract handling for Heidenhain posts.
Simplified implementation of Flow post.
Renamed property 'rigidTapping' to 'useRigidTapping' for Heidenhain posts.
Changed defaults for properties and added support for enabling/disabling multi-axis for CR Onsrud router post.
Major update of ISEL post.
Updated tool info for HTML Setup Sheet and enabled tool list by default.
Updated description for HAAS milling posts to include '(pre-NGC)' to indicate that posts are for the pre-Next Generation Control.
Updated multi-axis support for Pocket NC, 5AXISMAKER, and HAAS posts.
Updated inverse time support for HAAS posts.
Updated inverse time support for Tormach PathPilot, Pocket NC, 5AXISMAKER, and Fadal posts.
Updated inverse time support for Fanuc with A-axis post.
Fixed wrong rotation for 5-axis indexing when tool axis is perpendicular to the slave table for Pocket NC.
Fixed canned cycles output for Anilam ISO post.
Use 6 decimals for to multi-axis vectors when no machine is defined for Siemens 840 posts.
Fixed G18 issue for polar interpolation mode for Doosan mill-turn post.
Fixed naming for property 'spindleSpeedInRPM' for Roland RML post.
Fixed potential failure for Heidenhain 407 post.
Fixed issue with failure for HAAS mill-turn posts.
Fixed missing axis limit for PLANE SPATIAL for Heidenhain and Heidenhain 426 posts.
Fixed missing spindle and coolant on command for rewind situations for HAAS mill-turn posts.
Fixed potentially missing model picture issue for Excel 2007 Setup Sheet.
Fixed wrong initial position issue for Brother post.
Fixed C-axis positioning for axial center drilling for HAAS mill-turn posts.
Fixed multi-axis support for Doosan mill-turn post.
Fixed issue with out of range C-axis for XZC milling for HAAS lathe posts.
Fixed G43.4 for Doosan VMC Fanuc post.
Fixed multi-axis indexing issue for HAAS posts.
Fixed unsupported G90/G91 for Mach4 turning post.
Fixed support for property 'useZ' at cycles for Torchmate post.
Fixed wrong syntax for cycles for XML post.
Fixed power-off support for nozzle down moves for Flow post.
Fixed tangency validation for Thermwood post.
Fixed missing EOT at program end for Maho 432 post.
Fixed slow positioning moves for canned cycles for Fadal post.
Fixed circular moves in ZX plane for ISEL post.
Fixed missing G43.4 TCP output for Fanuc posts.
Fixed subprogram issues for Heidenhain post.
Fixed missing length offset for Siemens 802D/810D posts. Note that length offset is always set to D1.
Fixed backwards compatibility issue for HAAS mill-turn posts.
Fixed G94 output for Fanuc with A-axis post.
Fixed position issue for subprogram for Fanuc post.
Fixed missing D-word with G41/G42 for Hydren Systems waterjet post.
Fixed missing output of main/sub spindle for axial center drilling for Mazak Integrex post.
Fixed issue for CSS mode for Siemens mill-turn post.
Fixed coolant handling for Tormach post.
Updated smoothing and fixed multi-axis support for Onsrud post.
Fixed turning output after drilling for Doosan mill-turn post.
Fixed inverse time support for Mach mill posts.
Disabled G2/G3 since unsupported for Carvey.
About Autodesk HSMWorks. Autodesk HSM 2018 software bundle provides the best value in integrated CAM software available. Included are HSM add-ons for SOLIDWORKS and Autodesk Inventor. Integrated CAM helps CNC programmers, designers, and engineers rapidly produce machined parts in one seamless workflow, while maintaining model associativity for quick updates to part changes. Whether you are working with multiple CAD formats or starting from pencil sketches, Integrated CAM with your design software is the simplest and fastest way to machine your parts.
HSMWorks is designed from the ground up to work inside SolidWorks, providing a logical extension of the parametric SolidWorks assembly environment into the CAM world. Experienced SolidWorks users will feel right at home working with HSMWorks and will be able to create high-quality toolpaths within minutes. New users will benefit from the comprehensive 2D and 3D CAD capabilities of SolidWorks mechanical design solutions and quickly extend any knowledge gained to the CAM process, resulting in improved design quality and reduced product development time.
About Autodesk. Autodesk helps people imagine, design and create a better world. Everyone-from design professionals, engineers and architects to digital artists, students and hobbyists-uses Autodesk software to unlock their creativity and solve important challenges.
Product: Autodesk HSMWorks
Version: Ultimate 2018.2 (R3) Build R3.42596
Supported Architectures: x64
Website Home Page :
System Requirements: PC
Supported Operating Systems: The same OS and hardware requirements for the version of software that you are using.
Software Prerequisites: compatible with the 2015 or newer versions of SOLIDWORKS
Size: 595.2 mb
Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live
Uploadgig https://uploadgig.com/file/download/2cef404dcA466afB/191rp.rar NitroFlare http://nitroflare.com/view/0AE9488090D69C1/191rp.rar Rapidgator http://rapidgator.net/file/735633d252f971976df97c8effc88f6e/191rp.rar.html Alfafile http://alfafile.net/file/mpaa/191rp.rar