Macs Fan Control 1.5.22 for Mac

Farid

Active Member
ayayvayv-150x150.webp

Version: 1.5.22
Operating System: macOS
Developer: CrystalIDEA Software
Interface language: English, Chinese, French, German, Italian, Japanese, Korean, Portuguese, Russian, Spanish

Macs Fan Control

macs-fan-control-pro-1.5.22-300x169.webp

Fan noise and heat on a Mac usually follow Apple's automatic curve, and this utility reads the same sensors and lets you override that curve when the stock profile is too loud or too warm.

Fans and sensors on one screen
The window is two tables: fans on one side, temperature sensors on the other. Fan rows show live RPM. Sensor rows include CPU and GPU readings CrystalIDEA exposes, plus S.M.A.R.T. data from many drives and NVMe temperatures when that preference is enabled. A menu-bar item can show fan speed and a sensor temperature, so a long export or compile does not require the main window to stay open.

Constant RPM or a sensor curve
Each fan is either Auto or Custom. Auto returns the fan to macOS. Custom locks a constant speed, such as 2000 or 4000 RPM, or ties speed to one sensor - a CPU reading, or a third-party drive that stays hot after an iMac disk replacement. If every fan remains on Auto, the app only monitors. Applying a custom speed depends on a privileged helper that writes fan control; when that helper cannot connect, a manual mode will not take effect. The vendor is explicit that this is for people who accept the risk: holding a fan too low can overheat the machine.

Saved presets versus the free three
The free edition includes three presets: Automatic, Full blast (every fan at maximum RPM), and one Custom slot. That slot is kept across launches only if it was active when you quit, and it is dropped as soon as you switch back to Automatic or Full blast. Pro adds saved custom presets on a one-time, per-computer license, not a subscription. Set the RPM or sensor rule, then save from the menu or with Command-S, and switch between a quiet profile and a sustained-load profile later. The license also includes priority support. A combined macOS and Windows license covers Boot Camp on Intel Macs; Apple silicon Macs have no Boot Camp path, and the Windows build is a 14-day trial without that dual license.

Quitting always restores the Automatic preset, so a custom curve does not remain in force after the process exits.

Helper, firmware, and this pre-release
The main download is a universal binary for macOS 10.13 High Sierra and later, Intel and Apple Silicon. macOS 10.7 through 10.12 uses a separate legacy build. Apple's firmware has at times limited manual RPM on some Apple Silicon notebooks; the app warns when it cannot apply the speed, and a later update documented full control returning on M3 and M4 MacBook Pro models. Build 1.5.22 is a GitHub pre-release; the vendor download page still offers 1.5.21 as the stable package, and this build adds M5 Pro and M6 Mac mini plus M5 Max and M5 Ultra Mac Studio support.

Show full description Pros & Cons Show details
✅ PROS
[*]The main window pairs live fan RPM with the temperature sensors CrystalIDEA can read, including many S.M.A.R.T. drives, so a hot disk is visible next to the fan that should answer it.
[*]Custom mode can lock a constant RPM or follow one sensor, which covers an iMac that stays loud after a hard-drive swap or a MacBook Pro that runs warm during a long export.
[*]Pro stores named presets and recalls them from the menu or with Command-S, so a quiet profile and a full-load profile do not have to be rebuilt each session.
[*]Quitting returns every fan to Apple's automatic control, so a manual curve does not keep spinning after the window closes.
[*]The main macOS build is a universal binary from 10.13 onward, and the Pro license is a one-time per-computer purchase rather than a subscription.
❌ CONS
[*]The free edition keeps only Automatic, Full blast, and a single Custom slot that is discarded when you leave it, so named profiles require the paid Pro license.
[*]Custom RPM depends on a privileged helper, and if that helper fails to connect, manual speeds cannot be applied.
[*]Apple firmware on some Apple Silicon notebooks can refuse the RPM you set, and the app can only warn that control is limited.
[*]The Windows Boot Camp build is a 14-day trial unless you buy the combined macOS and Windows license, and that path does not exist on Apple Silicon Macs.
[*]Forcing a fan too low can overheat the machine, and the vendor states the tool is for people who accept that risk.
[*]Version 1.5.22 is a GitHub pre-release, while the vendor download page still lists 1.5.21 as the stable build.
✅ What's New in 1.5.22 Show details
[*][New Macs] - Adds support for the M5 Pro and M6 Mac mini and for the M5 Max and M5 Ultra Mac Studio.
[*][Helper connection] - Fixes the "failed to connect to the helper tool" error on macOS.
[*][macOS 27 sensors] - Fixes missing temperature sensors on macOS 27.
[*][Manual mode] - Correctly detects a manual fan mode already set by another app on M4 Max and M5 Macs.
[*][eGPU disconnect] - Stops the app from closing when an eGPU is disconnected.
[*][Boot Camp fan count] - Fixes an invalid fan count under Boot Camp.
[*][Windows presets] - Keeps the list of custom presets after a Windows reboot.
[*][License memory] - Stops the app from forgetting the active preset and the license after a reboot.
[*][Boot Camp updates] - Fixes the update check on Windows under Boot Camp.

**◆──◇──◆──◇──◆──◇──◆──◇──◆──◇──◆**​

Macs Fan Control 1.5.22 for Mac (23 MB)
NitroFlare
Code:
Please, Log in or Register to view codes content!
RapidGator
Code:
Please, Log in or Register to view codes content!
 

Users who are viewing this thread

Top